Sharp Stereo System XL DH229 User Manual

ENGLISH  
MODEL  
XL-DH229P  
MICRO COMPONENT SYSTEM  
OPERATION MANUAL  
XL-DH229P Micro Component System consisting of XL-DH229P (main unit) and CP-DH229P (speaker system).  
EM  
ST  
SY  
T
EN  
N
X
L-DH  
PO  
M
O
C
9
22  
RO  
IC  
M
iPhone, iPod, iPod classic, iPod nano, and  
are trademarks of Apple Inc.,  
iPod touch  
registered in the U.S. and other countries.  
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically  
to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple  
is not responsible for the operation of this device or its compliance with safety and regulatory standards.  
Accessories  
Please confirm that the following accessories are included.  
A
S
W
A
2
G
iPhone® adaptor x 2  
(GCOVAA238AWSA - No 12) (RRMCGA246AWSA) (QANTLA004AWZZ)  
(GCOVAA239AWSA - No 15)  
Remote control x 1  
AM loop antenna x 1  
FM antenna x 1  
(92LFANT1535A)  
Special Note  
Supply of this product does not convey a license nor imply any right to distribute content created with this product in  
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating  
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution  
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact  
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for  
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.  
Printed in Malaysia  
11A R AS 1  
 
TINSZA756AWZZ  
IMPORTANT SAFETY INSTRUCTIONS (continued)  
11) Only use attachments/accessories specified by the  
manufacturer.  
20) Safety Check - Upon completion of any service or  
repairs to this product, ask the service technician to  
perform safety checks to determine that the product is  
in proper operating condition.  
12) Use only with the cart, stand, tripod,  
bracket, or table specified by the  
manufacturer, or sold with the apparatus.  
When a cart is used, use caution when  
moving the cart/apparatus combination  
to avoid injury from tip-over.  
21) Wall or ceiling mounting - When mounting the product  
on a wall or ceiling, be sure to install the product  
according to the method recommended by the  
manufacturer.  
13) Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
22) Power Lines - An outside antenna system should not  
be located in the vicinity of overhead power lines or  
other electric light or power circuits, or where it can  
fall into such power lines or circuits. When installing  
an outside antenna system, extreme care should  
be taken to keep from touching such power lines or  
circuits as contact with them might be fatal.  
23) Protective Attachment Plug - The product is equipped  
with an attachment plug having overload protection.  
This is a safety feature. See Instruction Manual  
for replacement or resetting of protective device.  
If replacement of the plug is required, be sure the  
service technician has used a replacement plug  
specified by the manufacturer that has the same  
overload protection as the original plug.  
24) Stand - Do not place the product on an unstable  
cart, stand, tripod or table. Placing the product on an  
unstable base can cause the product to fall, resulting  
in serious personal injuries as well as damage to the  
product. Use only a cart, stand, tripod, bracket or  
table recommended by the manufacturer or sold with  
the product. When mounting the product on a wall,  
be sure to follow the manufacturer’s instructions. Use  
only the mounting hardware recommended by the  
manufacturer.  
14) Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has  
been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
Additional Safety Information  
15) Power Sources - This product should be operated  
only from the type of power source indicated on the  
marking label. If you are not sure of the type of power  
supply to your home, consult your product dealer or  
local power company. For product intended to operate  
from battery power, or other sources, refer to the  
operating instructions.  
16) Overloading - Do not overload wall outlets, extension  
cords, or integral convenience receptacles as this can  
result in a risk of fire or electric shock.  
17) Object and Liquid Entry - Never push objects of any  
kind into this product through openings as they may  
touch dangerous voltage points or short-out parts that  
could result in a fire or electric shock. Never spill liquid  
of any kind on the product.  
18) Damage Requiring Service - Unplug this product from  
the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
a) When the AC cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen  
into the product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by  
following the operating instructions. Adjust only  
those controls that are covered by the operating  
instructions as an improper adjustment of other  
controls may result in damage and will often  
require extensive work by a qualified technician  
to restore the product to its normal operation,  
e) If the product has been dropped or damaged in  
any way, and  
f) When the product exhibits a distinct change in  
performance - this indicates a need for service.  
19) Replacement Parts - When replacement parts are  
required, be sure the service technician has used  
replacement parts specified by the manufacturer or  
have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric  
shock, or other hazards.  
E-2  
 
For U.S. customer only  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the  
"Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will,  
at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent  
at no charge to the purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below  
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or  
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide  
proof of purchase to the servicer.  
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.  
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE  
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow  
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those  
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.  
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and  
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described  
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the  
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.  
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused  
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any  
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion  
of incidental or consequential damages, so the above exclusion may not apply to you.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY  
FROM STATE TO STATE.  
Model Specific Section  
Your Product Model Number & Description:  
XL-DH229P MICRO COMPONENT SYSTEM  
(Be sure to have this information available when you need  
service for your Product.)  
One (1) year parts and labor from the date of purchase.  
Warranty Period for this Product:  
Non-functional accessories, supplies, and consumable  
items.  
Additional Item(s) Excluded from Warranty Coverage  
(if any):  
At a Sharp Authorized Servicer located in the United States.  
To find a location of the nearest Sharp Authorized Servicer,  
call Sharp toll free at 1-800-BE-SHARP.  
Where to Obtain Service:  
What to do to Obtain Service:  
Ship prepaid or carry in your Product to a Sharp Authorized  
Servicer. Be sure to have Proof of Purchase available. If  
you ship the Product, be sure it is insured and packaged  
securely.  
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07495-1163  
System connections  
O
O
Do not expose the unit to moisture, to temperatures higher than 140˚F  
(60˚C) or to extremely low temperatures.  
If your system does not work properly, disconnect the AC power cord  
from the AC outlet. Plug the AC power cord back in, and then turn on  
your system.  
In case of an electrical storm, unplug the unit for safety.  
Hold the AC power plug by the head when removing it from the AC outlet,  
as pulling the cord can damage internal wires.  
Q Precautions  
O
Please ensure that the equipment is positioned in a well ventilated area  
and ensure that there is at least 4  
top and back of the equipment.  
"
(10 cm) of free space along the sides,  
O
O
4" (10 cm)  
4" (10 cm)  
4" (10 cm)  
O
O
O
The AC power plug is used as a disconnect device and shall always  
remain readily operable.  
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
XL-DH229  
Do not remove the outer cover, as this may result in electric shock.  
Refer internal service to your local SHARP service facility.  
4" (10 cm)  
O
O
Use the unit on a firm, level surface free from vibration.  
Place the speakers at least 12" (30 cm) away from any CRT TV to avoid  
color variations across the TV screen. If the variations persist, move  
the speakers further away from the TV. LCD TV is not prone to such  
variation.  
This unit should only be used within the range of 41˚F  
(5˚C - 35˚C).  
-
95˚F  
Warning:  
The voltage used must be the same as that specified on this unit. Using this  
product with a higher voltage other than that which is specified is dangerous  
and may result in a fire or other type of accident causing damage. SHARP will  
not be held responsible for any damage resulting from use of this unit with a  
voltage other than that which is specified.  
O
O
Keep the unit away from direct sunlight, strong magnetic fields, excessive  
dust, humidity and electronic/electrical equipment (home computers,  
facsimiles, etc.) which generate electrical noise.  
Do not place anything on top of the unit.  
E-3  
 
System connections (continued)  
Make sure to unplug the AC power cord before making any connections.  
Video cable  
(not supplied)  
TV  
To video input jack  
Wire  
LEFT  
RIGHT  
AM loop  
antenna  
SPEAKERS  
Plug in with the  
lever side facing  
to the left.  
Installing the AM loop  
antenna  
FM antenna  
< Assembling >  
External FM antenna  
for better reception  
(not supplied)  
< Attaching to  
the wall >  
Wall  
Screws  
(not supplied)  
AC outlet  
(AC 120 V ~ 60 Hz)  
Q Volume control  
Remote control  
The sound level at a given volume setting depends on  
speaker efficiency, location, and various other factors. It is  
advisable to avoid exposure to high volume levels, which  
occurs while turning the unit on with the volume control  
setting up high, or while continually listening at high  
volumes. Excessive sound pressure from earphones and  
headphones can cause hearing loss.  
Q Battery installation  
Use 2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or  
similar). Batteries are not included.  
Plastic film covering can be removed or peeled off.  
1
2
Open the battery cover.  
Insert the batteries according to the direction indicated  
in the battery compartment.  
Q Speaker connection  
When inserting or removing the batteries, push them  
toward the battery terminals.  
Close the battery cover.  
O
O
Use speakers with an impedance of 4 ohms or more,  
as lower impedance speakers can damage the unit.  
Do not make a mistake when connecting the right and  
left speakers. The right speaker is the one on the right  
side when you face the unit.  
3
O
O
O
O
Insert the speaker plug fully with the lever side facing  
to the left.  
Hold the speaker plug when removing it from the unit.  
Pulling the wire may cause malfunction to the unit.  
Do not allow any objects to fall into or to be placed in  
the bass reflex ducts.  
Caution:  
O
O
O
Replace all old batteries with new ones at the same time.  
Do not mix old and new batteries.  
Remove the batteries if the unit will not be used for a long  
period of time. This will prevent potential damage due to  
battery leakage.  
Do not stand or sit on the speakers. You may be  
injured.  
O
O
O
Do not use rechargeable batteries (nickel-cadmium battery,  
etc.).  
Installing the batteries incorrectly may cause the unit to  
malfunction.  
Batteries (battery pack or batteries installed) shall not be  
exposed to excessive heat such as sunshine, fire or the like.  
E-4  
 
Q Auto power on function  
Remote control (continued)  
When you press any of the following buttons, the unit turns on.  
Notes concerning use:  
O
iPod® / iPhone, CD, USB, AUDIO IN, TUNER (BAND)  
on the remote control: Selected function is activated.  
button on the main unit: The unit turns on and  
playback of the last function will start (CD, TUNER,  
USB, iPod, AUDIO IN).  
O
O
O
Replace the batteries if the operating distance is  
reduced or if the operation becomes erratic.  
Periodically clean the transmitter on the remote control  
and the sensor on the unit with a soft cloth.  
Exposing the sensor on the unit to strong light may  
interfere with operation. Change the lighting or the  
direction of the unit.  
O
Q Auto power off function  
O
Keep the remote control away from moisture, heat,  
shock, and vibrations.  
The main unit will enter the stand-by mode (when iPod/  
iPhone is not docked) after 15 minutes of inactivity during:  
iPod/iPhone: No connection.  
AUDIO IN: No detection of input signal or very low sound  
audibility.  
General control  
TUNER: No reception of broadcast signal.  
CD / USB: In the stop mode.  
Note:  
However, if iPod/iPhone is docked, the unit will begin charging.  
“CHARGE MODE” will be displayed.  
Q Muting  
The volume is muted temporarily when pressing the MUTE  
button on the remote control. Press again to restore the volume.  
Q X-Bass control  
When the power is first turned on, the unit will enter the  
extra bass mode which emphasizes the bass frequencies,  
and “X-BASS” will appear. To cancel the extra bass mode,  
press the X-BASS button on the remote control.  
Q Bass control  
1
2
Press the BASS/TREBLE button to select “BASS”.  
Within 5 seconds, press the VOLUME (+ or -) button  
to adjust the bass.  
Q To turn the power on  
The first time the unit is plugged in, the unit will enter the  
demonstration mode.  
Q Treble control  
1
Press the BASS/TREBLE button to select “TREBLE”.  
2
Within 5 seconds, press the VOLUME (+ or -) button to  
adjust the treble.  
Remote  
control  
Function  
Main unit  
Operation  
Q Equalizer  
Power on/  
off  
Press to turn the  
power on or to  
go to stand-by  
mode.  
FLAT  
Equalizer off.  
When  
the  
EQUALIZER  
MODE button is pressed,  
the current mode setting will  
be displayed. To change to  
a different mode, press the  
EQUALIZER MODE button  
repeatedly until the desired  
sound mode appears.  
GAME For game.  
CLASSIC  
POPS  
For classical music.  
For pop music.  
____  
Demo on/  
off  
Press to enter to  
demonstration on  
or off mode.  
VOCAL Vocals are enhanced  
JAZZ  
For jazz.  
Q Display brightness control  
Q Function  
To dim the display brightness, press the DEMO/DIMMER  
button on the remote control.  
When the FUNCTION button on main unit is pressed, the  
current function will change to different mode. Press the  
FUNCTION button repeatedly to select desired function.  
Q Volume auto fade-in  
CD  
FM STEREO  
FM MONO  
AM  
If you turn off and on the main unit with the volume set to  
27 or higher, the volume starts at 16 and fades in to the  
last set level.  
iPod  
USB  
AUDIO IN  
Q Volume control  
Note:  
The backup function will protect the memorized function  
mode for a few hours should there be a power failure or  
the AC power cord becomes disconnected.  
Turn the volume knob toward VOL +/- (on main unit) or  
press VOLUME +/- (on remote control) to increase or  
decrease the volume.  
E-5  
 
Listening to the iPod or iPhone  
iPhone and iPod operations  
Made for:  
Q To insert iPod or iPhone adaptor  
1
Open the iPod cover by pulling up the tip.  
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
iPhone 3GS  
iPhone 3G  
iPhone  
iPod touch (3rd generation)  
iPod touch (2nd generation)  
iPod touch (1st generation)  
iPod classic  
iPod with video  
iPod nano (5th generation)  
iPod nano (4th generation)  
iPod nano (3rd generation)  
iPod nano (2nd generation)  
iPod nano (1st generation)  
iPod with color display  
iPod mini  
2
Insert the iPod or iPhone adaptor into unit and  
connect your iPod or iPhone.  
iPhone  
iPhone (bottom)  
Dock connector  
Caution:  
Please update your iPod unit to the latest software version  
from Apple’s homepage before using it.  
Notes:  
O
Once the iPod or iPhone is connected to the unit it will  
begin charging.  
iPhone adaptor  
O
The message “This accessory is not made to work with  
iPhone” or similar, may appear on the iPhone screen  
when:  
iPhone dock  
- battery is low.  
- the iPhone is not properly docked (eg. slanting).  
If this occurs, remove and re-dock the iPhone.  
This product is made for iPhone. To prevent  
random interference when iPhone is docked, the  
headphone output is disabled, and “HP INVALID”  
will be displayed. You may also experience brief  
audio interference during incoming calls.  
iPhone connector  
O
Caution:  
Unplug all accessories from the iPod or iPhone before  
inserting it into the dock.  
Q To remove iPod or iPhone adaptor  
Insert the tip of a screwdriver (“-” type,  
small) into the adaptor hole as shown  
and lift upward to remove.  
Q iPod and iPhone adaptor connection  
Notes:  
O
Please use the adaptor supplied with your iPod or  
iPhone unit.  
You can use an audio cable to connect your iPod to the  
AUDIO IN jack if:  
1. your iPod adaptor does not fit into the iPod dock on  
the main unit.  
2. you have an iPod that does not have an iPod  
adaptor.  
Q iPod or iPhone playback  
1
2
Press the ON/STAND-BY button to turn the power on.  
O
Press the iPod/iPhone button on the remote control  
or FUNCTION button repeatedly on the main unit to  
select iPod function.  
3
4
Insert iPod or iPhone unit in iPod dock of main unit.  
“DOCK OK” will be displayed for 3 seconds.  
Press the  
playback.  
(iPod/iPhone  
)
button to start  
3. you have an iPod that does not have an iPod 30 pin  
connector.  
Q iPhone playback  
iPhone  
Adaptor No.  
iPhone  
Description  
Capacity  
O
Sound will only switch from iPhone to the main unit after  
authentication process is completed in approximately 10  
seconds.  
12  
15  
15  
iPhone  
4GB & 8GB & 16GB  
8GB & 16GB  
iPhone 3G  
iPhone 3GS  
O
O
Incoming calls will pause the playback and iPhone  
ringtones will be heard from the main unit speakers only.  
Once the calls are answered, the conversation can  
only be heard through the built-in iPhone speaker. Turn  
on the iPhone speaker or undock the iPhone to start  
conversation.  
16GB & 32GB  
Q To disconnect iPod or iPhone  
Simply remove the iPod or iPhone from the iPod dock. It is  
safe to do so even during playback.  
E-6  
 
Listening to the iPod or iPhone  
(continued)  
Q Various iPod functions  
Main  
unit  
Remote  
control  
Function  
Play  
Operation  
Q Navigating the iPod and iPhone menus  
Press in the pause  
mode.  
1
Press the MENU button to view the menu on iPod or iPhone  
unit. Press it again to go back to previous menu.  
Pause  
Press in the playback  
mode.  
2
Use the PRESET ( or ) button to select an item on the  
menu and then press ENTER button.  
Track  
up/down  
Press in the playback  
or pause mode. If you  
press the button in the  
pause mode, press the  
button to start the  
Note:  
When navigating the iPod or iPhone menu with remote control,  
do not operate any of the buttons on the iPod or iPhone unit. The  
volume level is adjusted by pressing the VOL (+ or -) button on  
the main unit or the remote control. Adjusting the volume on the  
iPod and iPhone units give no effect.  
____  
desired track.  
Fast  
Press and hold down in  
the playback mode.  
Release the button to  
resume playback.  
forward/  
reverse  
____  
____  
iPod and iPhone operations:  
The operations described below depend on the generation iPod  
and iPhone you are using.  
Display  
iPod back light ON.  
Press for more than  
2 seconds to toggle  
the video out display  
between iPod or TV.  
System on operation:  
When the main unit is powered on, the iPod and iPhone units will  
automatically power on when docked in the unit.  
Repeat  
Shuffle  
Press to toggle repeat  
System off (stand-by operation):  
When the main unit is turned to stand-by mode, the docked iPod  
and iPhone unit will automatically turn to stand-by mode.  
____  
____  
mode.  
Press and hold down to  
toggle shuffle mode.  
Q Watching videos on a TV connected to iPod  
iPod  
Menu  
Press to view the iPod  
menu during iPod  
function.  
Press to confirm the  
selection.  
or iPhone  
____  
____  
1
2
Press the DISPLAY (TV OUT) button for more than  
seconds. “TV DISP” will appear on display.  
2
iPod  
Enter  
Press the ENTER button to start playback.  
iPod  
Cursor  
Up/Down  
Press to select the iPod  
menu.  
Notes:  
O
If the TV Out setting is already turned on at video menu,  
the video is automatically displayed on the TV screen when  
ENTER key is pressed.  
____  
O
To return to watching video on iPod or iPhone screen, press  
the MENU button to enter video menu. Then press the  
DISPLAY (TV OUT) button for more than 2 seconds until  
“iPod DISP” appears.  
Listening to a CD or MP3/WMA disc  
Q Disc playback  
O
During iPod or iPhone video playback, pressing the DISPLAY  
(TV OUT) button will not toggle video out display between  
iPod and TV.  
1
Press the ON/STAND-BY button to turn the power on.  
Press the CD button on the remote control or  
FUNCTION button repeatedly on the main unit to  
select CD function.  
Press the OPEN/CLOSE button to open the disc tray.  
Place the disc on the disc tray, label side up.  
Press the OPEN/CLOSE button to close the disc tray.  
2
iPod or iPhone playback detection function:  
Once the play button on the iPod or iPhone unit is pressed,  
the main unit will automatically change to iPod function  
overriding the previous function selected.  
3
4
5
6
Press the  
(CD/USB  
) button to start playback.  
Caution:  
O
After the last track is played, the unit will stop  
automatically.  
Unplug all accessories for the iPod or iPhone before inserting  
it into the iPod dock.  
Stop button ( ) at main unit is invalid during iPod function.  
O
Notes for CD or MP3/WMA disc:  
O
When the end of the last track is reached during fast  
forward, “END” will appear on the display and CD  
operation will be paused. When the beginning of the  
first track is reached during fast reverse, the unit will  
enter the playback mode (only for CD).  
O
Rewritable multi-session discs with unfinished writing,  
can still be played.  
E-7  
 
Q Repeat play  
Listening to a CD or MP3/WMA disc  
(continued)  
Repeat play can play one track, all tracks or a programed  
sequence continuously.  
Q Various disc functions  
To repeat one track:  
Press the PLAY MODE button repeatedly until “1-REPEAT”  
appears. Press the  
Main  
unit  
Remote  
control  
(CD/USB  
) button.  
Function  
Play  
Operation  
To repeat all tracks:  
Press the PLAY MODE button repeatedly until “ALL  
Press in the stop mode.  
REPEAT” appears. Press the  
(CD/USB  
) button.  
Stop  
Press in the playback  
mode.  
To repeat desired tracks:  
Perform steps 1 - 5 in “Programed play” section and  
then press the PLAY MODE button repeatedly until “ALL  
REPEAT” appears.  
Pause  
Press in the playback  
mode. Press the  
button to resume playback  
from the paused point.  
To cancel repeat play:  
Press the PLAY MODE button repeatedly until “NORMAL”  
appears and “  
” disappears.  
Track up/  
down  
Press in the playback or  
stop mode.  
If you press the button in  
the stop mode, press the  
button to start the  
desired track.  
Press and hold down in the  
playback mode.  
____  
____  
Fast  
forward/  
reverse  
Q Random play  
The tracks on the disc can be played in random order  
automatically.  
Release the button to  
resume playback.  
To random play all tracks:  
Press and hold down PLAY MODE button on the remote  
Advanced CD or MP3/WMA disc playback  
control until “RANDOM” appears. Press the  
) button.  
(CD/USB  
To cancel random play:  
Press the PLAY MODE button until “NORMALappears  
and “R” disappears.  
Notes:  
RRG3W
O
If you press the  
to the track selected next by the random operation. On the  
other hand, the button does not allow you to move to  
button during random play, you can move  
Q Direct track search  
the previous track. The beginning of the track being played  
will be located.  
In random play, the unit will select and play tracks  
automatically. (You cannot select the order of the tracks.)  
By using the Numeric buttons, the desired tracks on the  
current disc can be played.  
Use the Numeric buttons on the remote control to select  
O
the desired track while playing the selected disc.  
Caution:  
O
O
The Numeric buttons allow you to select up to number 9.  
When selecting number 10 or higher, use the “10+”  
button.  
After performing repeat play, be sure to press the (CD/  
USB ) button. Otherwise, the disc will play continuously.  
Q Programed play (CD)  
A. For example, to choose 13  
1
2
3
Press the “10+” button once.  
Press the “1” button.  
Press the “3” button.  
You can choose up to 32 selections for playback in the  
order you like.  
Selected track  
number  
1
While in the stop mode, press the MEMORY button on the  
remote control to enter the programing save mode.  
B. For example, to choose 130  
1
2
3
4
Press the “10+” button twice.  
Press the “1” button.  
Press the “3” button.  
Press the “0” button.  
2
Press the  
select the desired track.  
or  
buttons on the remote control to  
Notes:  
O
A track number higher than the number of tracks on the  
disc cannot be selected.  
O
During random play, direct search is not possible.  
To stop playback:  
Press the (CD/USB ) button.  
Selected track number  
E-8  
 
Q Procedure to playback MP3/WMA disc  
Advanced CD or MP3/WMA disc  
playback (continued)  
with folder mode on  
To play back CD-R/RW.  
3
4
Press the MEMORY button to save the track number.  
1
Press the CD button, and load an MP3/WMA disc. Press  
Repeat steps 2 - 3 for other tracks. Up to 32 tracks  
can be programed. If you want to check the programed  
tracks, press the MEMORY button repeatedly. If you  
make a mistake, the programed tracks can be cleared  
by pressing the CLEAR button.  
the FOLDER button and disc info will be displayed.  
MP3 indicator  
Disc  
WMA indicator  
Name  
TOTAL indicator  
5
Press the  
(CD/USB  
) button to start playback.  
Q Programed play (MP3/WMA)  
Total number of folder  
Total number of files  
2
Press the FOLDER button, and press the PRESET ( or  
button to select desired playback folder. (Folder mode on)  
FOLDER  
indicator  
)
1
While in the stop mode, press the MEMORY button to  
enter the programing save mode.  
First track number in  
FOLDER number  
2
Press the PRESET (  
control to select the desired folder.  
or  
) button on the remote  
the folder  
Select desired file to be played back by pressing the  
button.  
3
4
or  
Press the  
(CD/USB  
) button. Playback will start and  
file name will be displayed.  
Then press the  
or  
button on the remote control  
O
O
Title, Artist and Album name are displayed if they are  
recorded on the disc.  
In case of playback with the folder mode on, press  
to select the desired tracks.  
the PRESET (  
or  
) button, and the folder can be  
selected even though it is in playback/pause mode. It  
will continue playback/pause mode in the 1st track of the  
selected folder.  
3
Press the MEMORY button to save the folder and track  
number.  
4
5
Repeat steps 2 - 3 for other folder/tracks. Up to 32  
tracks can be programed.  
O
Display content can be changed by pressing the  
DISPLAY button.  
Press the  
(CD/USB  
) button to start playback.  
File name display  
Title display  
To cancel the programed play mode:  
During programed stop mode, press the (CD/USB  
)
Album display  
Artist display  
button. The display will show “MEM CLEAR” and all the  
programed contents will be cleared.  
Note:  
If “NO SUPPORT” is displayed, it means “Copyright protected  
WMA file” or “Not supported playback file” is selected.  
Adding tracks to the program:  
If a program has been previously stored, the “MEMORY”  
indicator will be displayed. Press the MEMORY button  
repeatedly to go to the last program memory. Then follow  
steps 2 - 3 to add tracks.The new tracks will be stored after  
the last track of the previous program.  
Listening to USB mass storage  
device/MP3 player  
Notes:  
O
When  
a
disc is ejected, the program is automatically  
canceled.  
O
If you press the ON/STAND-BY button to enter the stand-  
by mode or change the function from CD to another, the  
programed selections will be cleared.  
O
During the program operation, random play is not possible.  
Note:  
This product is not compatible with MTP and AAC file  
systems from USB mass storage device or MP3 player.  
E-9  
 
O
USB cable is not recommended for use in this audio  
system to connect to USB memory device. Use of the  
USB cable will affect the performance of this audio  
system.  
Listening to USB mass storage device/  
MP3 player (continued)  
Q To play back USB/MP3 player with folder  
O
O
This USB memory cannot be operated via USB hub.  
The USB terminal in this unit is not intended for a PC  
connection but is used for music streaming with a USB  
memory device.  
External HDD-storage cannot be played back via USB  
terminal.  
mode off  
1
Press the USB button on the remote control or  
FUNCTION button repeatedly on main unit to select  
USB function. Connect the USB memory device that  
has MP3/WMA format files on the unit. When the USB  
memory is connected to the main unit, the device  
information will be displayed.  
O
O
O
If the data inside the USB memory is large, it may take  
longer time for the data to be read.  
This product can play WMA and MP3 files. It will  
automatically detect the file type being played. If  
unplayableleisplayedonthisproduct,NOSUPPORT”  
is indicated and the file will be automatically skipped.  
This will take a few seconds. If abnormal indications  
appear on the display due to the unspecified file, turn  
off the unit and then turn it on again.  
2
3
Select desired file to be played back by pressing the  
or  
button.  
Press the  
(CD/USB  
) button. Playback will  
start and the file name will be displayed.  
O
Title, Artist and Album name are displayed if they  
are recorded in the USB memory device.  
O
This product relates to USB mass storage devices and  
MP3 players. It may however face some irregularities  
due to various unforeseen reasons from some devices.  
Should this happen, turn off the unit and then turn it  
on again.  
The USB port is only intended for direct connection to  
a USB memory device without any cable.  
During CD function, MP3 player will not be charging.  
O
Display content can be changed by pressing the  
DISPLAY button.  
Note:  
To pause playback:  
Press the (CD/USB  
) button.  
O
O
Q To play back USB/MP3 player with folder  
mode on  
1
Press the USB button on the remote control or  
FUNCTION button repeatedly on main unit to select  
USB function. Connect the USB memory device that  
has MP3/WMA format files on the unit. When the USB  
memory is connected to the main unit, the device  
information will be displayed.  
Advanced USB playback  
The following functions are the same as CD  
operations:  
Page  
Direct track search ........................................................8  
Repeat play ....................................................................8  
Random play..................................................................8  
Programed play...........................................................8-9  
2
Press the FOLDER button, and press the PRESET  
(
or ) button to select desired playback folder. To  
start playback with folder mode on, go to step 4. To  
change the playback folder, press the PRESET ( or  
) button to select another folder.  
Note:  
If USB memory device is not connected, “NO MEDIA” will  
be shown on the display.  
3
4
Select desired file to be played back by pressing the  
or  
Press the  
start and the file name will be displayed.  
button.  
(CD/USB  
) button. Playback will  
Notes:  
O
O
O
O
This unit only supports “MPEG-1 Audio Layer-3”  
format. (Sampling Frequency is 32, 44.1, 48kHz)  
Playback order for MP3 files may differ depending on  
the writing software used during file download.  
Bitrate which is supported by MP3 is 32~320 kbps,  
WMA is 64~160 kbps.  
For MP3/WMA files, please put “.MP3” “.WMA”  
extension. Files cannot be played back if there is no  
MP3/WMA extension.  
O
Title, Artist and Album name are displayed if they  
are recorded in the USB memory device.  
O
Display content can be changed by pressing the  
DISPLAY button.  
Q To remove USB memory device  
1
2
Press the (CD/USB ) button to stop playback.  
Disconnect USB memory device from the USB  
terminal.  
O
O
Playlists are not supported on this unit.  
This unit can display Folder Name or File Name up to  
32 characters.  
Notes:  
O
O
Maximum total number of MP3/WMA files is 1024.  
Maximum total number of folders is 255 inclusive of  
root directory.  
SHARP will not be held liable for the loss of data while  
the USB memory device is connected to the audio  
system.  
Files compressed in MP3 and/or WMA format can be  
played back when connected to the USB terminal.  
This USB memory’s format supports FAT 16 or FAT  
32.  
SHARP cannot guarantee that all USB memory  
devices will work on this audio system.  
O
O
The display playback time may not be displayed  
correctly when playing back a variable bitrate file.  
The ID3TAG information supported are TITLE, ARTIST  
and ALBUM only. Title name, artist name and album  
name can be displayed by pressing the DISPLAY  
button during file playback or pause mode.  
WMA meta tag also supports title, artist and album  
name which are recorded in WMA files. Copyright  
protected WMA files cannot be played back.  
O
O
O
O
E-10  
 
4
5
Within 30 seconds, press the MEMORY button to store  
that station in memory. If the “MEMORY” and preset  
number indicators disappear before the station is  
memorized, repeat the operation from step 2.  
Repeat steps 1 - 4 to set other stations, or to change  
a preset station. When a new station is stored in the  
memory, the station previously memorized for that  
preset channel number will be erased.  
Listening to the radio  
Note:  
The backup function protects the memorized stations for a few  
hours should there be a power failure or the AC power cord  
become disconnected.  
Q To recall a preset station  
1
Press the PRESET ( or ) button for less than 0.5  
seconds to select the desired station.  
Q To scan the preset stations  
The stations saved in the memory can be scanned  
automatically. (Preset memory scan)  
1
Press the PRESET (  
or  
) button for more than  
0.5 seconds. The preset number will flash and the  
programed stations will be tuned in sequentially, for 5  
seconds each.  
Q Tuning  
1
2
Press the ON/STAND-BY button to turn the power on.  
Press the FUNCTION button on the main unit  
or TUNER (BAND) button on the remote control  
repeatedly to select the desired frequency band (FM  
stereo, FM mono or AM).  
2
Press the PRESET ( or ) button again when the  
desired station is located.  
Q To erase entire preset memory  
3
Press the TUNING ( or ) (TUNING (  
button to tune in to the desired station.  
or  
))  
1
Press the POWER ON/STAND-BY button to enter the stand-  
by mode.  
O
O
Manual tuning:  
Press the TUNING  
button repeatedly to tune in to the desired station.  
Auto tuning:  
2
WhilepressingdowntheFUNCTIONbutton,pressthePOWER  
ON/STAND-BY button until “TUNER CLEAR” appears.  
(
or ) (TUNING (  
or  
))  
When the TUNING  
(
or ) (TUNING (  
or  
))  
button is pressed for more than 0.5 seconds, scanning  
will start automatically and the tuner will stop at the first  
receivable broadcast station.  
Setting the clock (Remote control only)  
Notes:  
O
When radio interference occurs, auto scan tuning may  
stop automatically at that point.  
O
O
Auto scan tuning will skip weak signal stations.  
To stop the auto tuning, press the TUNING ( or  
(TUNING ( or )) button again.  
To receive an FM stereo transmission:  
)
O
Press the FUNCTION button on main unit or TUNER (BAND)  
button on the remote control to select stereo mode and “ST”  
indicator will be displayed. “ ” will appear when an FM  
broadcast is in stereo.  
O
If the FM reception is weak, press the TUNER (BAND) button  
to extinguish the “ST” indicator. The reception changes to  
monaural, and the sound becomes clearer.  
In this example, the clock is set for the 12-hour (AM 12:00) display.  
1
2
3
Press the ON/STAND-BY button to turn the power on.  
Press the CLOCK/TIMER button.  
Within 10 seconds, press the MEMORY button. Press  
Q Presetting a station  
the  
or  
button to select 12-hour or 24-hour display  
You can store 40 AM and FM stations in memory and  
recall them at the push of a button. (Preset tuning)  
and then press the MEMORY button.  
The 12-hour display will appear.  
(AM 12:00 - PM 11:59)  
1
2
Perform steps 1 - 3 in “Tuning”.  
Press the MEMORY button.  
The 12-hour display will appear.  
(AM 0:00 - PM 11:59)  
The 24-hour display will appear.  
(0:00 - 23:59)  
4
To adjust the hour, press the  
or  
button and then  
3
Within 30 seconds, press the PRESET ( or ) button  
to select the preset channel number. Store the stations  
in memory, in order, starting with preset channel 1.  
press the MEMORY button. Press the  
or button  
once to advance the time by 1 hour. Hold it down to  
advance continuously.  
E-11  
 
When you select the tuner, select a station by pressing the  
Setting the clock (continued)  
or  
button, and then press the MEMORY button. If  
a station has not been programmed, “NO PRESET” will be  
displayed and timer setting will be cancelled.  
5
To adjust the minutes, press the  
then press the MEMORY button. Press the  
button once to advance the time by 1 minute.  
or  
button and  
or  
9
Adjust the volume using theVOLUME control, and then press  
the MEMORY button. Do not turn the volume up too high.  
To confirm the time display:  
Press the CLOCK/TIMER button. The time display will  
appear for about 5 seconds.  
10 Press the ON/STAND-BY button to enter the power stand-by  
mode. The “TIMER” indicator lights up and the unit is ready  
for timer playback.  
Note:  
The “CLOCK” will appear or time will be displayed when the AC  
power supply is restored after a power failure or unplugging the  
unit. If incorrect, readjust the clock as follows.  
To readjust the clock:  
Perform “Setting the clock” from step 1. If the “CLOCK” does not  
appear in step 2, step 3 (for selecting the 24-hour or 12-hour  
display) will be skipped.  
To change the 24-hour or 12-hour display:  
11 When the preset time is reached, playback will start. The  
1
Clear all the programed contents. [Refer to “Factory reset,  
clearing all memory” on page 14 for details.]  
volume will increase gradually until it reaches the preset  
volume. The  
indicator will blink during once timer  
2
Perform “Setting the clock” from step 1 onwards.  
playback. The “DAILY” indicator will blink during daily timer  
playback.  
Timer and sleep operation (Remote  
control only)  
12 When the timer end time is reached, the system will enter the  
power stand-by mode automatically.  
Once timer:  
The timer will be cancelled.  
Once timer:  
Once timer play works for one time only at a preset time.  
Daily timer:  
The timer operates at the same time every day. It will continue  
until the daily timer setting is cancelled. Cancel the daily timer  
when it is not in use.  
Daily timer:  
Daily timer play works at the same preset time every day that we  
set. For example, set the timer as a wake-up call every morning.  
Notes:  
Using the once timer and daily timer in combination:  
For example, use the once timer to listen a radio program, and  
use the daily timer to wake up.  
O
When performing timer playback using another unit  
connected to the USB terminal or AUDIO IN socket, select  
“USB” or “AUDIO IN” in step 8.  
O
This unit will turn on or enter the power stand-by mode  
automatically. However, the connected unit will not turn on  
or off.To stop the timer playback, follow step “Cancelling the  
timer setting” of this page.  
1 minute or more  
Daily timer  
Once timer  
Start  
Checking the timer setting:  
Stop  
Start  
Stop  
1
Turn the power on and press and hold down the CLOCK/  
TIMER button.  
Q Timer playback  
2
Within 10 seconds, press the  
“ONCE SET” or “DAILY SET”, and press the MEMORY  
button.  
Within 10 seconds, press the  
“TIMER CALL, and press the MEMORY button.  
or  
button to select  
Before setting timer:  
O
Check that the clock is set to the correct time (refer to  
page 11-12). If it is not set, you cannot use the timer  
function.  
3
or  
button to select  
Canceling the timer setting:  
O
For timer playback: Plug in USB or load discs or dock iPod  
to be played.  
1
Turn the power on and press and hold down the CLOCK/  
TIMER button.  
2
Within 10 seconds, press the  
“ONCE SET” or “DAILY SET”, and press the MEMORY  
button.  
or  
button to select  
1
2
3
Press the ON/STAND-BY button to turn the power on.  
Press and hold the CLOCK/TIMER button.  
3
Within 10 seconds, press the  
“TIMER OFF”, and press the MEMORY button. Timer will be  
canceled (the setting will not be canceled).  
or  
button to select  
Within 10 seconds, press the  
or  
button to select  
“ONCE SET” or “DAILY SET”, and press the MEMORY  
button. Set the clock to the correct time if “ONCE SET” or  
“DAILY SET” does not appear.  
Reusing the memorized timer setting:  
The timer setting will be memorized once it is entered. To reuse  
the same setting, perform the following operations.  
4
5
6
Within 10 seconds, press the  
or  
button to select  
“TIMER SET”, and press the MEMORY button.  
1
Turn the power on and press and hold down the CLOCK/  
TIMER button.  
Within 10 seconds, press the  
“ONCE SET” or “DAILY SET”, and press the MEMORY  
button.  
Within 10 seconds, press the  
“TIMER ON”, and press the MEMORY button.  
Press the ON/STAND-BY button to enter the power stand-  
by mode.  
To adjust the hour, press the  
the MEMORY button.  
To adjust the minutes, press the  
press the MEMORY button.  
or  
button and then press  
or button and then  
2
or  
button to select  
7
8
Set the time to finish as in steps 5 and 6 above.  
3
4
or  
button to select  
To select the timer playback source (CD, TUNER, USB,  
iPodor AUDIO IN), press the  
MEMORY button.  
or  
button. Press the  
E-12  
 
Timer and sleep operation  
(Remote control only) (continued)  
Enhancing your system  
The connection cord is not included. Purchase a commercially  
available cord as shown below.  
Q Sleep operation  
Portable  
audio  
player, etc.  
The radio, compact disc, iPod and USB can all be turned  
off automatically.  
1
2
3
Play back the desired sound source.  
Press the SLEEP button.  
Within 10 seconds, press the SLEEP button repeatedly  
to select the time.  
Audio cable  
(not supplied)  
10  
20  
30  
....... 80  
90  
4
5
“SLEEP” will appear.  
The unit will enter the power stand-by mode  
automatically after the preset time has elapsed. The  
volume will be turned down 1 minute before the sleep  
operation finishes.  
To confirm the remaining sleep time:  
While “SLEEP” is indicated, press the SLEEP button.  
MICRO COMPONENT SYSTEM  
XL-DH229P  
1
To cancel the sleep operation:  
Press the ON/STAND-BY button while “SLEEP” is  
indicated. To cancel the sleep operation without setting  
the unit to the stand-by mode, proceed as follows.  
Q Listening to the playback sounds of  
portable audio player, etc.  
1
2
While “SLEEP” is indicated, press the SLEEP button.  
Within 10 seconds, press the SLEEP button repeatedly  
to select “SLEEP 00”.  
1
Use a connection cord to connect the portable audio  
player etc. to the AUDIO IN jack. When using video  
equipment, connect the audio output to this unit and  
the video output to a television.  
Q To use timer and sleep operation together  
2
3
Press the ON/STAND-BY button to turn the power on.  
Sleep and timer playback:  
For example, you can fall asleep listening to the radio and  
wake up to CD in the next morning.  
1
2
Press the AUDIO IN button on the remote control or  
FUNCTION button repeatedly on main unit to select  
AUDIO IN function.  
Play the connected equipment. If volume level of the  
connected device is too high, sound distortion may  
occur. Should this happen, lower the volume of the  
connected device. If volume level is too low, increase  
the volume of the connected device.  
Set the sleep time (see above, steps 1 - 5).  
While the sleep timer is set, set the timer playback  
(steps 2 - 9, page 12).  
4
Timer playback setting  
Sleep timer setting  
90 minutes  
End time  
Note:  
Desired time  
To prevent noise interference, place the unit away from the  
television.  
Timer playback start  
time  
Sleep operation will  
automatically stop  
Q Headphones  
O
Do not turn the volume on to full at switch on and listen  
to music at moderate levels. Excessive sound pressure  
from earphones and headphones can cause hearing  
loss.  
O
O
Before plugging in or unplugging the headphone,  
reduce the volume.  
Be sure your headphone has a 1/8" (3.5 mm) diameter  
plug and impedance between 16 and 50 ohms. The  
recommended impedance is 32 ohms.  
Plugging in the headphone disconnects the speakers  
automatically. Adjust the volume using the VOLUME  
control.  
O
E-13  
 
Q iPod and iPhone  
Troubleshooting chart  
Many potential problems can be resolved by the owner without calling a  
Symptom  
Possible cause  
service technician.  
O
No sound is produced.  
No image appears on  
the TV/monitor.  
O
O
The iPod or iPhone is not playing.  
The iPod or iPhone is not properly  
connected to the unit.  
Is the AC power cord of the unit  
plugged in?  
The video cable is not properly  
connected.  
The TV/monitor’s input selection is not  
properly set.  
If something is wrong with this product, check the following before calling your  
authorized SHARP dealer or service center.  
Q General  
O
O
O
O
Symptom  
Possible cause  
O
O
The clock is not set to  
the correct time.  
O
Did a power failure occur? Reset the  
clock. (Refer page 11)  
When a button is  
pressed, the unit does  
not respond.  
O
O
Set the unit to the power stand-by  
mode and then turn it back on.  
If the unit still malfunctions, reset it.  
(Refer page 14)  
The iPod TV out feature has not been  
set to output video.  
O
O
iPod or iPhone will not  
charge.  
O
The iPod or iPhone is not making full  
contact with the connector.  
O
No sound is heard.  
O
O
O
Is the volume level set to “MIN”?  
Are the headphones connected?  
Are the speaker wires disconnected?  
O
O
Using iPod (3rd generation).  
The iPod or iPhone is not supported.  
Refer to page 6 for compatible models.  
Q CD player  
“This accessory is not  
made to work with  
iPhone” or similar,  
appears on iPhone  
screen.  
O
O
The iPhone battery is low. Please  
charge the iPhone.  
iPhone is not properly docked.  
Symptom  
Possible cause  
O
O
Playback does not start.  
Playback stops in  
the middle or is not  
performed properly.  
O
O
O
Is the disc loaded upside down?  
Does the disc satisfy the standards?  
Is the disc distorted or scratched?  
Q Condensation  
O
Playback sounds are  
skipped, or stopped in  
the middle of a track.  
O
Is the unit located near excessive  
vibrations?  
Is the disc very dirty?  
Has condensation formed inside  
the unit?  
Sudden temperature changes, storage or operation in an extremely humid  
environment may cause condensation inside the cabinet (CD pickup, etc.) or  
on the transmitter on the remote control. Condensation can cause the unit to  
malfunction. If this happens, leave the power on with no disc in the unit until  
normal playback is possible (about 1 hour). Wipe off any condensation on the  
transmitter with a soft cloth before operating the unit.  
O
O
Q Remote control  
Q If problem occurs during operation  
Symptom  
Possible cause  
When this product is subject to strong outdoor interference (mechanical  
shock, excessive static electricity, abnormal supply voltage due to lightning,  
etc.) or if it is operated incorrectly, it may malfunction.  
O
The remote control  
does not operate.  
O
Is the AC power cord of the unit  
plugged in?  
Is the battery polarity correct?  
Are the batteries dead?  
Is the distance or angle incorrect?  
Does the remote control sensor  
receive strong light?  
O
O
O
O
If such a problem occurs, do the following:  
1
Set the unit to the stand-by mode and turn the power on again.  
2
If the unit is not restored in the previous operation, unplug and plug in the  
unit again, and then turn the power on.  
Note:  
Q Tuner  
If neither operation above restores the unit, clear all the memory by resetting  
it.  
Symptom  
Possible cause  
O
The radio makes  
unusual noises  
continuously.  
O
O
Is the unit placed near the TV or  
computer?  
Is the FM antenna or AM loop antenna  
placed properly? Move the antenna  
away from the AC power cord if it is  
located nearby.  
Q Factory reset, clearing all memory  
1
Press the POWER ON/STAND-BY button to enter the power stand-by  
mode.  
2
While pressing down the OPEN/CLOSE button, press the POWER  
ON/STAND-BY button until “ALL CLEAR” appears.  
Q USB  
Symptom  
Possible cause  
O
Device cannot be  
detected.  
O
O
O
O
Is there any MP3/WMA file available?  
Is the device properly connected?  
Is it an MTP device?  
Caution:  
This operation will erase all data stored in memory including clock, timer  
settings, tuner preset, and CD program.  
Does the device contain AAC file only?  
O
Playback does not start.  
O
O
Is it a copyright protected WMA file?  
Is it a false MP3 file?  
Q Before transporting the unit  
Remove the iPod/iPhone, USB memory device and disc from the unit. Then,  
set the unit to the power stand-by mode. Carrying the unit with iPod/iPhone or  
USB memory device left docked or discs left inside might damage the unit.  
O
O
Wrong time display.  
Wrong file name  
display.  
O
Is Variable Bitrate file being played  
back?  
Is the File Name written in Chinese or  
Japanese characters?  
O
E-14  
 
Q Amplifier  
Troubleshooting chart (continued)  
Q Care of compact discs  
Output power  
RMS: Total 100 watt (50 W per channel  
into 4 ohms at 1 kHz, 10% Total  
harmonic distortion.)  
FTC: 37.5 watt minimum RMS per  
channel into 4 ohms from 100 Hz  
to 20 kHz, 10% Total harmonic  
distortion.  
Compact discs are fairly resistant to damage, however mistracking can occur  
due to an accumulation of dirt on the disc surface. Follow the guidelines below  
for maximum enjoyment from your CD collection and player.  
O
O
O
Do not write on either side of the disc, particularly the non-label side from  
which signals are read. Do not mark this surface.  
Keep your discs away from direct sunlight, heat, and excessive  
moisture.  
Always hold the CDs by the edges. Fingerprints, dirt, or water on the  
CDs can cause noise or mistracking. If a CD is dirty or does not play  
properly, clean it with a soft, dry cloth, wiping straight out from the center,  
along the radius.  
Output terminals  
Input terminals  
Speakers: 4 ohms  
20Hz - 20kHz  
Video output: 1 Vp-p  
Headphones: 16-50 ohms  
(recommended: 32 ohms)  
Audio In (audio signal):  
250 mV/47 k ohms  
Maintenance  
Q USB  
Q Cleaning the CD pickup lens  
USB host interface  
O
O
Complies with USB 1.1 (Full  
Speed)/2.0 Mass Storage Class.  
Support Bulk only and CBI protocol.  
In order to ensure proper operation of the CD player, preventative maintenance  
(cleaning of the laser pickup lens) should be performed periodically. Lens  
cleaners are commercially available. Contact your local CD software dealer  
for options.  
Support file  
Bitrate support  
Other  
O
O
MPEG 1 Layer 3  
WMA (Non DRM)  
Q Cleaning the cabinet  
O
O
MP3 (32 ~ 320 kbps)  
WMA (64 ~ 160 kbps)  
Periodically wipe the cabinet with a soft cloth and a diluted soap solution,  
then with a dry cloth.  
O
O
O
Maximum total number of MP3/WMA  
files is 1024.  
Caution:  
O
Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may  
damage the cabinet.  
Do not apply oil to the inside of the unit. It may cause malfunctions.  
Maximum total number of folders is  
255 INCLUSIVE of root directory.  
The ID3TAG information supported  
are TITLE, ARTIST and ALBUM  
only.  
O
Specifications  
O
O
Supports ID3TAG version  
version 2.  
1
and  
As part of our policy of continuous improvement, SHARP reserves the right  
to make design and specification changes for product improvement without  
prior notice. The performance specification figures indicated are nominal  
values of production units. There may be some deviations from these values  
in individual units.  
File system support  
Support USB devices with Microsoft  
Windows/DOS/FAT 12/FAT 16/ FAT  
32.  
O
2 kbyte block length for sector.  
Q General  
Q Tuner  
Power source  
AC 120 V ~ 60 Hz  
42 W  
Power consumption  
Dimensions  
Frequency range  
FM: 87.5 - 108 MHz  
AM: 530 - 1,710 kHz  
Width: 6 - 1/2" (165 mm)  
Height: 8 - 2/3" (220 mm)  
Depth: 9 - 1/4" (235 mm)  
Preset  
40 (FM and AM station)  
Weight  
8.6 lbs. (3.9 kg)  
Q Speaker  
Type  
2-way type speaker system  
2" (5 cm) tweeter  
Q CD player  
4" (10 cm) woofer  
Type  
Single disc multi-play compact disc player  
Maximum input power  
Rated input power  
Impedance  
100 W  
50 W  
Signal readout  
Non-contact, 3-beam  
semiconductor laser pickup  
D/A converter  
Multi bit D/A converter  
20 - 20,000 Hz  
4 ohms  
Frequency response  
Dynamic range  
Dimensions  
Width: 5 - 13/16" (148 mm)  
Height: 8-11/16" (220 mm)  
Depth: 6-7/16" (163 mm)  
90 dB (1 kHz)  
Weight  
3.6 lbs (1.6 kg)/each  
E-15  
 

Sharp Flat Panel Television LC 13B4U User Manual
Sharp Microwave Oven Stainless Steel Microwave Oven User Manual
SonicWALL Camera Accessories SRA 1200 4200 User Manual
Sony Headphones 3 095 629 132 User Manual
Sony Stereo System XL DH259N User Manual
Sony Stereo System ZS Y2L User Manual
Sony Universal Remote RM AV2500T User Manual
Southbend Convection Oven 460AA 3G User Manual
Sunbeam Patio Heater SFH442 User Manual
Tappan Range 316000181 User Manual